Innova ITX9900 Inversion Table with Air Lumbar Support, Black/Gray
$139.95
Last updated on January 5, 2025 11:47 am Details
Description
- Featuring an air lumbar support that allows you to control the amount of support is needed for your back
-
Six (6) position angle adjustable pin with added protective cover for easy positioning and safer inverting over strap System
-
True balance System for easy inverting with ergonomical ankle holding System
-
Improved ergonomic ankle holding System with large front holder and smaller rear holder, to alleviate the pressures on the ankle while inverting
-
Accommodates users 4ft-10in to 6ft-6in with a 300 lbs. Weight capacity
-
Assembled Product Dimensions (L x W x H): 5.50 x 22.50 x 51.00 Inches
-
Sport Type: Fitness & Yoga
Miguel A. –
I purchased this table to alleviate my lower back pain. Did a lot of research and decided on this one and am very glad I did. It was really easy to assemble, instructions very clear. It is well constructed, heavy duty. I’ve been using it for a week and my back pain has lessened a lot. I expect it to take awhile but I have high hopes that my back will feel better in a short time. I use it 3 times a day for 10 minutes each time. Very comfortable for the ankles while hanging. The locking arm is long and easy to access. Great table, worth the price.
TrevorJ –
I made this purchase for back pain relief and it does the job at a great price. After 5-10 minutes upside down it has relieved pinched nerves immediately and when used regularly, keeps my back muscles from seizing up through tightness. It’s not a miracle worker but pain is greatly relieved!!
Hanging at complete 90 degrees did hurt my ankles and knees a bit so now I keep it to about 75 degree angle and it does the job with no soreness to my ankles or over stretch at the knees.
Was not hard to assemble but takes some time and it feels very sturdy.
I could take or leave the back pillow and rarely use it but glad it’s there when I want a more intense stretch to lower back.
The long rod adjustment at the ankles is a must have!!! Some tables come with very short rods and you have to bend way over to get in and out. That would not feel good on my back just after inversion.
Lastly, you do have to adjust the table to your correct height so that it lifts and lowers with the movement of your arms like in the video. This is easy to do and does work. However, as other reviews have stated….upon hanging upside down my ankles slip a bit from the holders which shifts my center of gravity so the table doesn’t raise all the way up with my arm movement when I’m done and want to get up. Not a big deal because I’m strong enough to use the handles and pull myself up. If you are frail or unable to pull your body weight up, this would be a problem. Would not be an issue for most people though.
Brian –
Fuerte y resistente aún para personas pesadas
Amazon Customer –
Initially, I learned about this type of device by watching the ‘Teeter’ infomercial. I immediately thought this concept would be beneficial for me. I suffer from degenerative disk disease and degenerative joint disease (osteoarthritis). In fact, the joints in my shoulders were so bad that both had to be surgically replaced. The disk disease is especially prevalent in my lower back. The marketing for “Teeter’ was well done but the price point was too much to take a chance on: especially for a machine that I didn’t know how I’d physically react to. I looked into less expensive alternatives and my research led me to the Innova device. This machine is everything I could have hoped for. This Amazon purchase was delivered promptly in a well-packaged box, The company took care to protect all the parts with a combination of styrofoam and plastic wrapping. The small parts (screws, washers, nuts, and ASSEMBLY WRENCHES) were smartly shipped in a compartmentalized and labeled plastic ‘clamshell’ packaging. Upon looking at the various parts I said ‘Oh oh, I’m going to have to get into an IKEA frame of mind. But, after spending about ten minutes ingesting the easy to understand setup directions, I was reassured that there would be no real problem in doing this by myself. I am happy to report that the assembly was straightforward and not very time consuming at all. It took me an hour and a half while watching TV and having coffee. I would think it would be fun to do with a family member. I added the picture to demonstrate the completed dimension. The fact that the device can be folded so that the base segments come together is a big plus. Now, using the device. There are a few things I learned right away. The first being that there should be someone with you during your first attempt to do an inversion. You just don’t how your body will react to a new and unique physical experience and you certainly don’t want to get stuck in an inversion while you’re testing your various machine settings. The second recommendation is to not go full inversion on the first try and third please note there will be adjustments to make. These will include the height factor on the center beam adjustment bar. Even though placing it on your precise height is simple, your body proportions may require you to move it up or down a notch. Pay close attention to achieving a firm center of gravity. This is very important because you want to have total control over your inversion, particularly the ease of going into and coming out of it as well as the rate of movement. The headrest is also adjustable. You don’t want your head to be higher than the headrest and it will be up to you how to utilize the air support at mid-machine. My conclusion: This machine has helped my back and neck issues profoundly! I use it almost every day and I am at a point where I love getting on it. I actually feel the separation of the vertebra and the stretching of my muscles. In my case, the routine I do also greatly helps my prosthetic shoulder joints. The machine is very smooth. It also gives me a feeling of confidence that it isn’t going to collapse or fall apart while I’m using it. I’m a big guy (230lbs.) so I worry about such things. The foot lock release bar is an example of thoughtful engineering and the ankle clamps are not uncomfortable. I’ve read about people saying that you should wear athletic shoes while using the machine. I fully agree. The sneakers give my feet a feeling of greater support. Of course, it’s up to you. There is one little piece of advice I’d like to give. Keep your cell phone within reach at all times while using the table by yourself when no one is home. Just in case of a freak occurrence. All in all, this is a FIVE STAR product. Happy inverting.
CC –
Me encanta, es fácil de usar, al armarlo si lleva tiempo y las instrucciones son un poco confusas, ayuda el video que puedes buscar en YouTube.
Los beneficios son casi inmediatos, lo uso diario 3 min y el dolor ha disminuido considerablemente
Amazon Customer –
Easy to assemble, well built and works as advertised for this 6’ 175lb man. Ankle holders are more comfortable than foot rollbar I had used previously. Well balanced such that it tilts back and forth very easily when inverting.
CW –
I’ve been getting by with an old weslow inversion table that is very hard on the ankles, and the back is just basically a flat net. This thing is incredible with the adjustable ankle padding and padded table it’s just light years ahead of what I’m used to. For the price I don’t think this thing can be beat. Set up takes a little while but the instructions are super simple step 1 through 5. This thing was packed really, really well. Most importantly it provides my messed up back relief. Very happy with this purchase.
Dave N. –
Helped my back pain already and only use inverted first at 15 degrees and now 30 degrees setting for only a minute at a time.
Edmundo Giron –
The inversion table was delivered in 2 days through Amazon Prime. It weighs 28.5 kg (62.5 lbs) so be ready for that and maybe get someone to help moving it. Assembly took a little over an hour and everything fitted smoothly. The table is quite well made and sturdy but a little bit on the cheaper side. I wish the welding was done a little better then I would call this a DELUXE table. I am 178 cm and I set the height to 175 cm and that works perfect for me. After a little practice I was able to invert myself on the table smoothly and slowly. The headrest was adjusted to the lowest level when it arrived. You may need to adjust it again as one tends to slide down a little once inverted and your head will need support. Overall, I am very happy with this inversion table at this price point and I sincerely don’t think you can find anything better for the price. I would give this four and a half stars. Recommended
Update: I pinched my finger on the ankle holding bar while pulling it, so be careful! I find it more secure and comfortable to wear athletic shoes when using the table.